电子信息类专业学位研究生培养方案
Electronic Information Major Degree Postgraduate Training Program
专业类别(代码)： 电子信息（0854）
Major Category (Discipline Code): Electronic Information（0854）
一、 培养目标
电子信息类硕士专业学位是与电子信息领域任职资格相联系的专业学位，强调工程性、实践性和应用性，培养应用型、复合型高层次工程技术和工程管理人才。在满足国家工程类硕士专业学位基本要求的基础上，面向经济社会发展和行业创新发展需求，紧密结合自身的优势与特色，明晰培养定位，突出培养特色，更好地服务于电子信息类硕士专业学位研究生的职业发展需求和社会多元化的人才需求。具体要求为：
1、拥护中国共产党的领导，热爱祖国，遵纪守法。具有服务国家和人民的高度社会责任感、良好的职业道德和创业精神，具有科学严谨和求真务实的学习态度和工作作风，身心健康。
2、掌握所从事行业领域坚实的基础理论和宽广的专业知识，熟悉行业领域的相关规范，具有良好的职业素养，在行业领域的某一方向具有独立担负工程规划、工程设计、工程实施、工程研究、工程开发、工程管理等专门技术工作的能力。
3、掌握一门外国语。
Training Objectives
The professional master degree in electronic information is a professional degree related to the qualifications in the field of electronic information that emphasizes engineering, practicality and application, and cultivates application-oriented and compound high-level engineering and engineering management talents. On the basis of meeting the basic requirement of the national engineering master professional degree, the talents training is to face the demands of the development of the socio-economic and industry innovation, closely combine its own advantages and characteristics, clearly cultivate positioning, highlight the cultivation characteristics, and better meet the career development demands of the electronic information master professional degree postgraduate and the diversified demands for talents in the society. Specific requirements are as follows:
1、Espouse the leadership of the Communist Party of China, love the motherland, abide by the laws and regulations.
2、Master the solid basic theory and broad professional knowledge in the industry field, be familiar with the relevant knowledge in the field of the industry, have good professional quality, and have the ability to independently undertake specialized technical work such as engineering planning, engineering design, engineering implementation, engineering research, engineering development and engineering management in a certain direction in the field of the industry.
3、Master a foreign language.
二、类别简介及研究方向
电子信息硕士专业学位是与电子信息领域任职资格相联系的专业学位，包括电子、通信、控制、计算机、电气、软件、光电、仪器仪表等，以及网络空间安全、人工智能、虚拟现实、集成电路、大数据与云计算、物联网、生物信息、量子信息等新兴方向。在电子信息技术开发与应用、工程设计与实施、技术攻关与改造、工程规划与管理等方面培养基础扎实、素质全面、工程实践能力强，具有一定创新能力的应用型、复合型高层次工程技术与工程管理人才。
该专业下设如下研究方向：（1）计算机技术；（2）软件工程；（3）控制工程；（4）电子与通信工程；（5）集成电路工程。
Category Introduction and Research Directions
The master degree of electronic information is a professional degree related to the qualification in the field of electronic information, including electronics, communications, control, computers, electricity, software, photoelectricity, instruments and meters, and other emerging directions such as cyberspace security, artificial intelligence, virtual reality, integrated circuits, big data and cloud computing, internet of things, biological information, quantum information, etc. In the development and application of electronic information technology, engineering design and implementation, technological breakthrough and transformation, engineering planning and management, etc., it aims to cultivate application-oriented and composite high-level engineering technology and engineering management talents with solid foundation, comprehensive quality, strong engineering practice ability and certain innovation ability.
The major has the following research directions: (1) computer technology; (2) software engineering; (3) control engineering; (4) electronics and communication engineering; (5) integrated circuit engineering.
三、培养方式与学习年限
1. 采用课程学习、专业实践和学位论文相结合的培养方式。
2. 学位论文指导实行双导师制，校内导师是研究生培养的第一责任人，校外导师协助校内导师共同完成研究生的培养任务，同时加强导师团队、方向合作。以校内导师为主，聘请校外导师参与实践过程、项目研究等环节的指导工作。校外导师一般应具有丰富的实践经验并有高级技术职称。
3.培养方式分全日制或非全日制两种：学制一般为3年；全日制最长不超过4年，非全日制硕士最长不超过5年。
Training Method and Learning Years
1. The training method of combining curriculum study, professional practice and degree thesis is adopted.
2. The dissertation guidance is implemented by a double tutorial system, including both intramural and extramural tutors. The intramural tutor is the first person responsible for training postgraduates. Meanwhile, the extramural tutor assists the intramural tutor to finish the training task of postgraduates. Both the two tutors need to strengthen their teamwork and research direction cooperation. The whole training is mainly performed by the intramural tutors. Generally speaking, the extramural tutors should have rich experience in practice, and have senior technical title. They are employed to participate in the guidance work in the practice process, project research, and the like.
3. The training methods are divided into full-time or part-time ones: the length of schooling is generally 3 years; the maximum length of full-time is not more than 4 years, and the maximum length of part-time master’s is not more than 5 years.
四、课程学分及学分要求
1. 课程设置
本类别硕士研究生课程由学位课、非学位课、补修课三部分组成，原则上在两个学期完成（课程设置见附表）。
（1）学位课
学位课包括公共必修课和专业基础课。所有学位课为考试课，考核方式为课堂笔试（含闭卷、开卷），成绩由考试、平时作业、考勤等综合评定。
（2）非学位课
非学位课包含公共选修课、专业选修课和技术创新选修，主要体现该专业领域的行业知识前沿、技术前沿和发展趋势。
所有非学位课为考查课，考核方式可以选择考试也可以选择考查，其形式可以是课堂笔试、口试、提交课程论文或报告（含总结、综述、心得体会等）。
（3）补修课
跨学科、跨专业或同等学力的研究生，应补修2-3门本专业或相近专业的本科生课程；补修课由导师确定，通过自学或跟随本科生听课方式进行，需考核并记录成绩，但不计入培养计划和研究生课程学分。
2. 学分要求
（1）总学分不少于32学分。其中，课程总学分不少于24学分，专业实践6学分，开题报告和中期检查各1学分。
（2）课程中学位课应修满11学分，非学位课不少于13学分。
（3）学位课中，公共必修课应修满7学分，专业基础课不少于4学分。
（4）非学位课中，技术创新选修课不少于2学分，课程的选修可结合研究方向和指导教师的意见进行选择。
课程设置见附表。未尽事宜按照《河南科技大学研究生课程教学管理规定》（河科大研[2017]25号）文件执行。
Curriculum Credits and Credit Requirements
1. Curriculum Provision
Master’s degree curriculums in this category consist of degree curriculum and non-degree curriculum, which should be completed in two semesters in principle.
(1) Degree curriculums
Degree curriculums include public compulsory curriculums and professional basic curriculums.
Degree curriculums are all examination curriculums, and the examination methods is written examination (including closed-book exam or open-book examination), and the results are comprehensively assessed by examinations, usual homework, attendance, etc.
(2) Non-degree curriculums
Non-degree curriculums include public elective curriculums, professional elective curriculums and technical innovation elective curriculums. These curriculums should focus on the frontier of industry knowledge and technology, and the development trends.
Non-degree curriculums are examination curriculums, which may take the from of classroom written examination, oral examination, and submission of curriculum paper or reports (including summary, review, experience, etc.).
(3) Supplementary curriculums
Postgraduates who interdisciplinary, or enrolled in the equal education level capacity should take 2-3 additional undergraduate curriculums in the major or similar major. The supplementary curriculums are determined by the tutors and can be studied by self-study or by attending lectures with undergraduates. The results must be assessed and recorded, but not included in the course credits.
2. Credit Requirements
(1) The total credits should not be less than 32 credits. Among them, the total credits for the course should not be less than 24 credits, 6 credits for the professional practice, and 1 credit each for the thesis proposal and medium-term inspection.
(2) No less than 11 credits for degree courses and no less than 13 credits for non-degree courses.
(3) In degree courses, public required courses should be completed with 7 credits, and professional basic courses should not less than 4 credits.
(4) For non-degree courses, the elective course of technological innovation is no less than 2 credits. The courses can be selected according to the research direction and the opinions of the tutors.
Please refer to the curriculum schedule for details of curriculum setup.
Other matters not covered in the relevant courses should be implemented in accordance with Regulations on Teaching Management of Postgraduate Courses in Henan University of Science and Technology (HAUST Postgraduate File No. [2017]25).
五、技术创新素质培养(必修环节)
技术创新素质培养为必修环节，包括科研总结能力培养和技术创新能力培养。
科研总结能力培养环节的考核包括开题考核和中期考核，各1学分。具体依照《河南科技大学研究生学位论文选题及开题工作的规定》（河科大研[2015]18号）、《河南科技大学研究生中期考核暂行规定》（河科大研[2015]19号）相关规定执行。
专业实践采用集中实践与分段实践相结合的方式进行。具有2年及以上企业工作经历的工程类硕士专业学位研究生专业实践时间应不少于6个月,不具有2年企业经历的工程类硕士专业学位的研究生专业实践时间不少于1年。指导教师应为研究生制定详细的专业实践计划，指导其开展实践学习。实践期满后研究生要撰写实践学习总结报告，并按学校要求参加专业实践环节考核，通过者取得相应学分。
Cultivation of Technological Innovation Quality (Compulsory Courses)
The cultivation of technological innovation quality is a required link, including the cultivation of scientific research summary ability and the cultivation of technological innovation ability.
The assessment for the training of scientific research summary ability includes the opening assessment and medium-term inspection, with 1 credit for each assessment. They should be implemented in accordance with the relevant provisions of the Provisions on Selections of Topics and Opening Work for Postgraduate Dissertations of Henan University of Science and Technology (HAUST Postgraduate File No. [2015]18) and Interim Provisions on the Medium-term Inspection of Postgraduates of Henan University of Science and Technology (HAUST Postgraduate File No. [2015]19 ).
Professional practice should be finished by combining focus practice and segmented practice. Professional practice time for master’s degree postgraduates with 2 years or more of enterprise work experience should not be less than 6 months, and professional practice time for master’s degree postgraduates without 2 years of enterprise experience should not be less than 1 year, which shall be carried out by combining centralized practice with segmented practice. Instructors should formulate detailed professional practice plans for graduate students and guide them to carry out practical learning. After the expiration of the practice period, the graduate students should write a summary report of professional practice, and the training unit should examine the practice links of the graduate students, and the students who pass the examination should obtain corresponding credits.
六、学位论文
硕士研究生在修满培养计划所有课程学分后，即进入学位论文工作环节，包括开题、中期考核、学位论文预答辩及正式答辩等环节。
1. 论文类型与形式
按照《河南科技大学研究生学位论文选题及开题工作的规定》（河科大研[2015]18号）执行。
2. 开题与中期考核
按照《河南科技大学研究生学位论文选题及开题工作的规定》（河科大研[2015]18号）、《河南科技大学研究生中期考核暂行规定》（河科大研[2015]19号）相关规定执行。
3. 预答辩与答辩
依据《河南科技大学研究生答辩管理办法》（河科大研[2017]32号）文件要求执行。
Dissertation
After completing all the courses of the program, candidates will enter the work of dissertation, including thesis proposal, mid-term assessment, dissertation pre-defense and formal defense.
1. Type and format of the written manuscript
In accordance with the Regulations on the Selection and Opening of Postgraduate Dissertations of Henan University of Science and Technology (HAUST Postgraduate File No. [2015]18).
2. Thesis proposal and mid-term assessment
In accordance with the Regulations on Selection and Opening of Postgraduate Dissertations of Henan University of Science and Technology (HAUST Postgraduate File No. [2015]18) and the Interim Provisions on the Mid-term Assessment of Postgraduates of Henan University of Science and Technology (HAUST Postgraduate File No. [2015]19), the relevant provisions shall be implemented.
3. Pre-defense and defense
All defense works are carried out in accordance with the relevant provisions of the Regulations on the Management of Postgraduate Defense of Henan University of Science and Technology (HAUST Postgraduate File No. [2017]32).
七、学位申请与授予
硕士研究生完成课程学习及培养环节，取得规定学分，并完成学位论文后，可按有关规定开始学位申请与授予阶段的工作。硕士研究生在学位申请时，需要提供其攻读硕士学位期间能够反映其学位论文学术水平的社会评价材料。社会评价材料需满足《河南科技大学研究生学术成果社会评价认定办法》（河科大研[2017]26号）相关要求。
其它未尽事宜按照《河南科技大学学位授予工作细则》（河科大研[2017]31号）等相关规定件执行。达到各项规定要求的，根据招生类别授予电子信息硕士专业学位，同时获得硕士研究生毕业证书。
Application for Granting of Master's Degree
After completing the curriculums learning, and corresponding training, reaching the credit requirement and finishing dissertations, candidates may start the application for master’s degree in accordance with the relevant provisions. When applying for a master's degree, candidates need to provide academic evaluation materials which can reflect the academic level of their dissertations during their study for a master's degree. The social evaluation materials must meet the relevant requirements of the Regulations on Social Evaluation of Postgraduate Academic Achievements of Henan University of Science and Technology (HAUST Postgraduate File No. [2017]26).
Other affairs not included hereof shall be implemented in accordance with the Rules for Degree Granting of Henan University of Science and Technology (HAUST Postgraduate File No. [2017]31) and other relevant provisions. Those who meet the requirements of all regulations shall be awarded the professional master degree in Electronic Information according to the category of enrollment and be granted the Graduation Certificate.
